2350000027 Roth 1/2" Duplex Bushing With Fittings And Gasket

Roth 1/2" Duplex Bushing Supplied With Fittings And A Gasket For A Complete Tank Fit

The 2350000027 Roth duplex bushings are built to be installed directly into the Roth tank’s opening. They are held in place by the Roth tank cap nut and do not require an additional 2” NPT Die-Cast Adapter like a standard threaded tank bushing would.
They are being supplied with their gasket. Roth duplex bushings are available with slip-through compressi for either 3/8” or ½” copper tubing for fuel supply and return lines.
When a return line is not being used or replaced by a De-Aerator, one of the fittings could be replaced by a steel plug or one fitting could be used as a second supply line for a second appliance.
If a black iron supply line is more desirable than copper, the fitting could be removed, and since the opening in the bushing is threaded either 3/8” or ½” NPT on top and bottom, the black iron pipes could be screwed directly in.

2350000027 Ships from New York - Factory Direct

California Proposition 65 Warning