HS170FAVT HeatStar Propane Forced Air 170,000 Btu LP Heater

HeatStar By Enerco 125,000-170,000 Btu Forced Air LP Propane Contractor Series Heater.

HS170FAVT F170170 Replaced with HS170QFAVT F105509

Heavy-duty steel construction

125,000 - 170,000 BTU/HR - Propane

Heats approximately 4,000 sq. feet 

Minimum required tank size: 1-100 lb.

Runs up to 17 hours on 1-100-lb tank (low setting)

240-degree High-temperature limiter switch

Automatic Solid-State Ignition

Built-in Thermostat

20' 3/8” ID hose and regulator included

SPECIFICATIONS

Type of Gas: For use with Propane Only

Rating: 125,000-170,000 Btu/Hr. (61.5 117 kW)

Fuel Consumption: 5.8 - 7.8 lbs/hr. (2.6 - 3.6 kg/hr.)

Fuel Orifice Port No.: 1

Fuel Orifice Size: 2.35 mm

Heated Air Output 450 CFM (12.74 CU MM)

Gas Supply Pressure

To regulator Min 5 psig (0.14 mPa)

Regulator out 28” WC (6.97 kPa)

Electrical Input: 115V, 60 Hz, 1Ø, 5.5a

Min. Operating Voltage: 100V

Ignition: Direct Spark, interrupted type

Primary Flame Control: Solid State, 10-15 sec. timing

High Temperature Control: 240°F (116°C)

Listed/Certified: CSA

Unit Weight 32 lbs

Shipping Dimensions: 26.5" x 12" x 16.75"

Shipping Weight: 34 lbs

Shipping Cube: 3.0'

Warranty: 1 year limited

2019 Forced Air Propane 85-125k BTU Industrial Heater Manual

California Proposition 65 Warning